CART STATUS: Awaiting Adventure Gear.
MADE IN THE U.S.A.
FREE U.S. DELIVERY
TUNE-UPS & REPAIRS*
The ULA Atlas was conceived after several requests for a larger travel pack. Utilizing the popular ULA Dragonfly as a base we grew it into a heavy hauler. If you’re the type to add in that extra pair of shoes for a trip the Atlas is your pack.
With a need to carry extra weight we took our knowledge of lightweight frames and added a removable frame sheet made with two aluminum stays, 1/4 dense foam, and a soft backing. The load lift on the S-straps and our signature hip belt support, stabilize, and distribute the weight.
Internally there are two mesh pockets for you to keep your small items separated. If you find you’ve over packed there is still hope with the two internal compression straps. We selected a 420D light grey interior so that you can easily see everything in the bag when looking in from the large U-zip opening.
Externally there is a top quick access pocket, laptop sleeve, front mesh pocket, and two large water bottle pockets. All of the external zips are YKK #5 AquaGuard for added weather protection. If you have awkward bulky items or jackets throw them on the front bungee.
AT A GLANCE
WEIGHT: 36-47 OZ | 1,021-1,332 GM
VOLUME: 2,383 CU IN | 40 L
MAX LOAD: 35 LBS | 16 KG
- Carry-On Compliant (23″ x 10.5″ x 7″)
- 15″ Laptop Sleeve
- Mesh Shoulder Strap Pockets
- Large Tweave Side Pockets
- Internal Mesh Organizer Pocket
- Internal Compression Straps
- Quick Access Top Pocket
- ULA Signature S-Straps
- Padded Back-panel
- Logo-less Clean Look
- Rubberized Haul Loop
- YKK AquaGuard water-resistant Zipper
- Removable Frame Sheet w/ 2 Aluminum Stays (9 oz)
- Adjustable/Removable Sternum Strap (0.5 oz)
WEIGHT BY FABRIC
VX25, VX42 WEIGHT: 39 OZ | 1,106 GM
X15, X50, X51RS WEIGHT 39 OZ | 1,106 GM
OPTIONAL HIPBELT: + 8.0 OZ | 226.8 GM
VOLUMES + DIMENSIONS
VOLUME: 2,383 CU IN | 40 L
BREAKDOWN (CU IN):
- MAIN BODY: 1,690
- ZIPPERED FRONT MESH POCKET: 147
- LEFT SIDE MESH POCKET 160
- RIGHT SIDE MESH POCKET: 160
- LEFT SHOULDER STRAP POCKET: 13
- RIGHT SHOULDER STRAP POCKET: 13
- LEFT HIPBELT POCKET: 100
- RIGHT HIPBELT POCKET: 100
MAIN BODY: 23″ x 11 x 7″
2 INTERNAL MESH POCKETS: 9.5″ x 7.5″ Flat
QUICK ACCESS TOP POCKET: 10″ x 6″ x 2″
…one of the most popular high-performance technical fabrics in the industry. Low stretch, abrasion resistant, and a high denier face fabric strike a near-perfect balance between weight and durability. These multi-layered laminated fabrics are waterproof to 200+ PSI.
TERRAIN X-PAC VX21™
Terrain X-Pac VX21™ Fabric is one of the most popular high-performance technical fabrics in the industry. The combination of low stretch, waterproof construction, and 210 denier face fabric strikes a near-perfect balance between weight and durability.
HIGH VISIBILITY X-PAC VX25
High Visibility VX25 Fabric is made with UV resistant dyed polyester face fabric and was made to enhance safety. This laminate fabric is comprised of the following layers: C0 DWR 250 Denier Polyester Face, Black Polyester X-Ply™ at 22°, 0.25 Mil PET Film, and a 50 Denier Polyester Backing.
RX40 X-PAC ROBIC
Our ULA 400 Robic fabric as X-Pac. Highly tear and abrasion-resistant, RX40 Robic is reinforced with a ripstop weave, increasing tear strength and stitch holding capabilities. Multi-layered laminate is waterproof to 200+ PSI.
CAMOUFLAGE X-PAC X50™
The Camouflage X-Pac X50™ Fabric uses extra tough 500 Denier Cordura face fabric to create a highly abrasion resistant, tear resistant, high tensile and waterproof material that’s super bomber and can handle even the toughest of conditions. This laminate fabric is comprised of the following layers: C0 DWR 500 Denier Cordura Nylon Face, Black Polyester X-Ply™ at 22°, and a 0.5 Mil Shiny Polyester Film Backing.
X-Pac X51™ Fabric uses the heaviest, 500 x 1000D Cordura® face fabric for a highly abrasion-resistant, tear-resistant, waterproof material. X-Pac X51™ can handle the worst you can throw at it. This laminate fabric is comprised of the following layers: 500 x 1000 Denier Cordura Nylon Face, Black Polyester X-Ply™ at 22°, and a 0.5 Mil Shiny Polyester Film Backing.